minimum tire tread depth bc

Tuesday, September 13, 2022 Edit

A good tire tread depth is 532 or greater. Tires with 432 or less depth are recommended to be replaced.

Parts Of A Tire Tire Basics Certified Service

What Is A Good Tire Tread Depth.

. For select highways not located through mountain passes andor high snowfall areas tire and. 432nd or 18th of an inch in all. The minimum tread required at all points in all major grooves is.

The minimum depth of the treads depends on the tire and the groove. With 232 inch the tire cant disperse much moisture through the tread valleys. Mud and Snow MS tires with a minimum 35mm tread depth are the minimum requirement on BC Highways.

2 A winter tire under section 208 of the Act must a when tested in accordance with section 5. We know that tires are considered to be worn out at 15 mm or 232nds of an inch unless they are winter tires in which case the limit is 3 mm or 432nds of an inch of tread. 35 mm of tread depth across the whole tire.

Check all four tires in the exact same way and over multiple areas on the tire. Most modern ties have wear indictors built into the tire that indicate when the tire tread has reached the 232 mark. Each tire manufacturer has their own recommendation on when to replace tires based on remaining tread depth.

The average recommendation seems to be when tread depth. Drivers must obey winter tire and chain signs throughout the province from October 1 to April 30. The result of that condition is called hydroplaning.

These tires may only be used on BC highways from October 1 to April 30 and the studs should not protrude more than 2 mm from the tread or traction surface of the tire. While the legal limit is 232 of tread depth you can dramatically increase the stoping distance in wet conditions by. What Is The Minimum Amount Of Tread Your Tires Need.

Once tires reach 232 they are. Bare minimum is 232s and even that is risky. If the tread reaches the paws of the.

7162 1 A winter tire under section 208 of the Act must have at least 35 mm of tread depth. The typical new tire. Take your toonie and check every single tire by placing the coin in a tread.

Most states require a minimum tread depth of at least 232 of an inch. In BC appropriate winter tires are defined as those with either the MS mud and snow or mountainsnowflake symbol in good condition with a minimum tread depth of 35.

Easy Ways To Ensure Your Tires Are Safe Ctv News

Goodyear Wrangler Duratrac Tires Goodyear Tires Canada